RBD450/13 Individual Servo motor drives type of Copper Rod Breakdown Machine with annealing, double spooler PND630 and Down coiler
Advantages of this safe investment choice
Increase in quality:
High surface quality of the wires due to the optimized wire path (2° inclination of the gearing/drawing capstans) innovative drawing die holders with high-pressure cooling of the drawing dies
Increase in productivity:
Reduced downtime when changing the machine setup for different dimensions via multi-motor drive technology (quick drawing die change system)
Reduced downtime due to touch screen-
Based user guidance and fault display
Cost-effectiveness:
Reduced tool consumption (drawing capstans, drawing dies) with minimized-slip operation
energy savings of up to 20% are achieved by switching off unused drives long service intervals and extended drawing tool service life minimize the requirement to stock and use spare parts
Reduced consumption of oil and drawing lubricant
Design:
Optimized wire cooling/lubrication (due to the fully-immersed drawing basin) flexible adjustment of the wire elongation per draft
Individually driven drawing shafts in horizontal tandem layout three-phase AC drives, water-cooled and maintenance-free
Ergonomic and user-friendly machine design, with easy maintenance
no noise protection cabin required up to 85 dB (A)
helically geared precision gearing for extremely smooth operation and uniform load transmission vibration-damping grey cast iron housing for long service life
Highly reliable separation of drawing emulsion and gear oil via mechanical seal (long service intervals)
2,TECHNICAL PARAMETER
| 2.1 |
Inlet wire |
Φ8.0mm |
| 2.2 |
Outlet wire |
Φ1.2－Φ4.0mm |
| 2.3 |
Max speed of drawing |
25m/s |
| 2.4 |
Drawing block size |
Φ450mm |
| 2.5 |
Max number of passes |
13 |
| 2.6 |
Die dimension |
Φ38x25 |
| 2.7 |
Capacity of the accumulator |
7m |
| 2.8 |
Double Spooler bobbin size |
PND630 |
| |
|
|
| 2.9 |
Main motor power |
37kW (AC) X5, 30kWX7(AC) |
| 2.10 |
Power of motor for constantspeed wheel |
55kW (AC) |
| 2.11 |
Power of motor for spooler |
18.5kW×2 (AC) |
| 2.12 |
Installation size |
36000×4200×5000mm |
| 2.13. |
Down Coiler |
Φ900mm |
| 2.14. |
Annealer power |
55V,6000A (DC) |
Product Tags:
|
|
Annealing 25m/S 8mm Copper Rod Breakdown Machine Images
|
